Micron 3DP high end metal extruder

Technical specifications:

• Innovative "all metal" hot end features a detachable filament guide and nozzle module "DFGNM"
• All metal design" enables working with polycarbonate at 280- 300 degrees Celsius and with future materials that require higher working temperatures beyond those supported by plastic extruders and hot end.
• Reliable design: enabling strong filament gripping by using high torque 1:13 gear motor and stainless steel 303 hobbed gear with special teeth profile.
• Continuous idler bearing preload adjustment using 2 set screws.
• Easy opening service door that does not change idler springs preload, while opening and closing the service door
• Smooth filament feeding design that prevents the filament from being stuck after passing the hobbed gear.
• Tested with PLA, ABS, polycarbonate, nylon and PVA.

Electrical:

• Motor: Nema 11 Step Motor.
• Rated current/Phase: 0.67 Amps
• 6.2 VDC :Rated voltage/Phase
• Fan: 40x40x20 size, 12VD 
• Heater: 12V
• Thermistor: 100K ohm NTC thermistor

Mechanical:

• 1:13 Planetary Gearbox
• Materials: black anodize Aluminum, Stainless Steel and Brass.
• Filament size: 1.75mm
• Nozzle size: 0.35mm and 0.5mm
• Total weight: 440 gram

Installation:

Manufacturer can provide solid models of the extruder assembly and reference design for mounting plate
Micron 3DP extruder is priced at $289.95