Kamaq is a control software that is completely unfamiliar to me. Does anyone have any experiences with it? There are no reviews to be found ...
Kamaq features:
![]()
RepRap wiki:
http://www.reprap.org/wiki/Kamaq
Kamaq GitHub repository:
https://github.com/yope/kamaq
Kamaq features:
- Web interface with real-time monitoring and feedback via websockets.
- Temperature plots for heaters
- Direct motor control panel
- Nifty print-speed scale slider to adjust printing speed in real-time
- Real-time plot of current layer movements in 2D
- Linux-based RepRap firmware written in Python, with a web-interface in HTML5/JavaScript and websockets. It controls up to 4 stepper motors (axes) via standard USB audio device, end-switches and heaters via GPIO and hw-mon.
Kamaq is a 3D-printer (FDM) controller software running on an embedded Linux system. It is capable of controlling a RepRap-style 3D printer, but with different electronics. Stepper motor control is done using a 8-channel (7.1) USB audio device and some class-D audio amplifiers. Endstop switches are monitored via GPIO inputs (interrupt-capable) and temperature control for extruder and heated bed via standard hwmon-compatible ADC's and GPIO-outputs for heater control. The software has a web interface for machine control and monitoring.
RepRap wiki:
http://www.reprap.org/wiki/Kamaq
Kamaq GitHub repository:
https://github.com/yope/kamaq